How To Change Read Only Memory Card To Normal

In this article you will find out:

why y'all cannot format the write-protected SD bill of fare

methods on how to remove protection from a memory card

how DiskInternals software can help you

Are you lot ready? Let'southward read!

If an SD card is write-protected, what does that mean?

SD card is write protected

This may happen every time: y'all insert an SD card to the adapter in your computer/laptop, and you can see and read all the files located on information technology, but this is all that you can do with this SD card.

Information technology is incommunicable to add together anything, and you lot cannot format a write-protected card. And so y'all are wondering: how exercise I remove write protection on a micro SD carte du jour? This is why this article was created; once you lot have studied it, you volition not accept more questions.

Example one. SD card is write-protected for concrete reasons

SD card is write protected because of switcher

Here, the switch that protects the SD card from beingness overwritten is agile.

To fix it, disable the lock. On each SD card on ane side, there is a switch, which needs to be shifted in the opposite direction and so the SD bill of fare tin be reconnected to the figurer.

Did this method for removing write protection from an SD carte du jour not help you? No worries since there are many other solutions to the situation.

Example 2. SD card write-protected due to software

This situation may occur due to read-but attributes.

To set up it, delete them using the command line.

Press Win + X at the same time; you volition see a cmd window where you demand to type "diskpart" on the keyboard and confirm pressing Enter.

And then enter the command "listing disk" and printing Enter.

Disks connected to the organisation will appear in a new window. Select your SD card (y'all can find it by the appropriate deejay size; for instance, bulldoze 0).

Next, in command Prompt, blazon: "select disk 0", then printing Enter.

Next, enter the attributes. "disk clear read-but command" and press Enter.

These actions will remove the attributes and remove write protection from your micro SD carte.

If you removed write-protection and the SD card is empty, or there is no important data on information technology, then utilise case three.

If yous did everything correctly and the drive is write-protected anyway, then the reason is something else, so look for the reason and how to disable write-protection on the SD card in case 3.

Example 3. SD card write-protected but has no data on it

Due to read-only attributes, there are no important files on the SD card.

To set information technology, delete the attributes and and then format the write-protected SD card. Attributes can be removed in the same fashion on the control line as described above and then, without leaving the command line, you can format the retentivity card.

Here's how to practice it: type the post-obit commands and press Enter after each!

Again, these commands will erase all files on the memory card.

You need to Enter the Diskpart. All the commands you need to enter are emphasized with a red line.

After that, exit the command prompt and restart the computer. Your wink drive is like new!

Case 4. Write protection is gone just so is the data

This is due to improper use of the diskpart utility. (Sometimes instead of removing the write protection, users format their SD cards). And, as y'all know, due to the formatting, all information is lost.

To set up it, use DiskInternals Sectionalisation Recovery. This application recreates the file system on the SD card, so the files tin be found and restored. It recovers any file: photos, music, videos, documents, etc. You lot can also non worry well-nigh large files: the application tin can handle even them. It has been designed to satisfy user's needs without fail:

There are iii recovery wizards that will explain everything to you step past step, depending on your file organisation: Partition Recovery Wizard, NTFS Recovery Wizard, and FAT Recovery Sorcerer.

There are several scan modes (fast, full).

At that place is a free file preview for assurance.

In that location is a trial version at no cost; you lot only need to pay if you desire to save the recovered files to any disk visible to the system and with unshakable technical support.

Few like programs can boast so many bells and whistles.