How To Change The Scale In Autocad

Download Commodity

Download Article

This article will show you how to scale lines, objects, groups, blocks, or images in AutoCAD in two means. The outset is scaling by a factor, the 2d is scaling with a reference. Both methods are useful to AutoCAD users and make life simply a little chip easier for us!

1

Open an AutoCAD file with lines/objects/groups/blocks/images that you can scale. If it's a new file, only draw a line or insert an image.
ii

Select what you want to calibration.

Advertising
3

Discover the scale option. You lot can type "sc" or "scale" and press the spacebar/enter button, or in the ribbon, in the change tab, find the Scale push (Information technology'southward a blueish foursquare with a smaller grey square in the bottom left corner. If it's not in your modify tab, click the drop downward arrow for more than modify options.)
four

Specify your base indicate when asked. Your base point tin be on the object itself or it tin can be anywhere in the workspace. You lot can even click a indicate on another object to apply as a base of operations point. You lot can for example select the border of something, or the midpoint. Select your base point past clicking on information technology.
five
Specify your calibration factor. Using method 1 (scaling past a cistron), you can now type a number (a scale factor) and press spacebar/enter. Your object volition modify size according to that number. If you use decimals, the affair you want to calibration volition become smaller. Voila! You lot're done!
- Alternatively, you lot can calibration past moving your cursor around. When you find a size that you want, simply left click on the mouse to enter. This step makes it very difficult to scale down though.
Advertisement

1

Make certain you take two objects to piece of work with. This method is when yous have a sized object, and you lot desire to make another object to exist the aforementioned length/size/proportion as the starting time one. For this method you demand two objects to work with. One could be a line/object/cake/prototype/group and the other could exist unlike (eg. 1 line and ane image, or i block and one prototype). Or they could both be the same affair (eg. two lines or ii images).
two

Line up the two things so they have the same base of operations signal. Cull which object is the right size for you, and leave it lone. Choose the thing you want to calibration and click on it.
3

Blazon "sc" or "scale" and press ↵ Enter . Or choose the Scale button from the modify tab in the ribbon.
four

Specify a base point when asked. So select your base point (could be the point where the ii objects line upwardly).
5

Wait for the prompt bar to ask 'specify scale factor or [Re-create] [Reference]'. You can click on "reference" / or but type "r" and ↵ Enter .
six

Click on the base point of your object
7

Look for the prompt to enquire you lot to 'specify second signal'. You can select a midpoint of the object, or select the end, depending on how much you want to scale it. According to what you want, click on a point anywhere the object you desire to scale. (Don't click on the objects base indicate again.)
8

Specify a new length. At present yous can click on how long you desire the object to be. Information technology could exist to the midpoint of the first object, or information technology could be the full length of the outset object. If you put the Object Snap (OSnap) off at present, you lot tin can click anywhere in the workspace and your object will calibration to that size.

Advertisement

Add New Question

Question

What is the use of scale in AutoCAD?

This answer was written by one of our trained team of researchers who validated information technology for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

The calibration tool allows you to change the size of an element while even so keeping the same proportions. For instance, you can make a rectangle twice as large as it was, while all the same keeping the sides the same lengths relative to each other.
Question

How exercise I ready the scale in an AutoCAD layout?

This answer was written past 1 of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Select the layout viewport you want to modify, then click the triangular scale grip at the middle of the viewport. Select the calibration you want from the list to utilise it to the viewport.
Question

How do I check the scale in AutoCAD?

This answer was written by one of our trained team of researchers who validated it for accurateness and comprehensiveness.

wikiHow Staff Editor

Staff Answer

To check the scale of a calibration area or viewport, click the "View" tab, then select "Viewports Panel," and then "Calibration Monitor." Move your cursor over the scale area or viewport and look at the Scale Monitor dialog box to bank check the scale.