How To Change A Ignition Coil On A 2001 Honda Accord Ex

Changing the spark plugs on a Honda is very easy and tin can be completed in nether one 60 minutes.

The video in this guide is from a 2015 Honda Civic with a 4-cylinder engine. This guide will likewise assistance owners of Honda Accordance, CR-V, Fit, and other models with the four-cylinder engine.

What you will demand

Parts Required

• Honda Iridium Spark Plugs
  • Do non gap iridium spark plugs.
  • Older Honda vehicles apply copper and platinum spark plugs.
  • OEM Honda sparks plug brand are made by Denso and NGK.
• Honda Ignition Coils

Process

1. Park your Honda in a safe location. Set the parking brakes and remove the key.
2. Pull the hood release under the hood to open the hood.
3. It is recommended to disconnect the battery negative terminal and allow the engine to cool downwardly before y'all get started.
4. Remove the engine cover if your Honda has one. There will be two or four 10mm bolts that need to exist removed. Unplug the electrical connector from the ignition ringlet by pressing first so pulling the connector away from the plug.
5. Remove the 10mm bolts that secure the ignition coils.
6. Pull out the ignition coil. If the coils don't come out, endeavour twisting them slightly.
7. Use the spark plug socket, extension, and ratchet to remove the spark plugs.
8. Employ anti-seize grease to the threads of the new spark plug. Just use a thin coat on the thread.
9. Slowly motion the new spark plugs into the head. Practice not drop the spark plugs as this can harm the spark plug.
10. Once the gasket has made contact with the cylinder head, use the torque wrench to tighten them all to the recommended tightening torque. Torque Honda spark plugs to specification. Typical Honda spark plug torque is 13 ft/lb, 156 in-lb, 17.63 Nm.
11. Install the ignition scroll past pressing them downwards firmly on the spark plug.
12. Connect all the wires to the ignition scroll. Do not bandy the electrical connectors; they demand to go back in the same exact position as before.

Tips

• Don't utilise power tools to spiral the spark plugs.
• If you lot accidentally strip the spark plug thread, you volition either need to remove the caput and repair it.
• Another possible solution to set up stripped Honda spark plug threads is to use Spark Plug Thread Repair kit or heli-whorl.
• The tightening torque for a spark plug changes with the diameter of the spark plug.

Torque Specification

Typical Honda spark plug torque is 13 ft/lb, 156 in-lb, 17.63 Nm. Verify by calling your dealer.

Recommended Interval

Honda vehicles are very reliable simply what many owners forget is that spark plugs are a maintenance detail and should be replaced around the fourscore,000 and 100,000-mile mark. Many owners forget to change the spark plugs on their Honda until they get an engine misfire or hits 150k or fifty-fifty 200k miles.

FAQ

How often should I change the spark plugs?

Most Honda vehicles including Accord, Fit, Civic, Oddyse,y CR-V, Fit, etc., need the spark plugs changed every 90,000 miles. Older models with cooper spark plugs should be changed every 30,000 miles. The correct Honda spark plug alter interval is printed at the end of your owner's manual.

What is the correct Honda spark plug socket size?

five/8" spark plug socket or a 16mm socket.

What is the correct Honda spark plug gap?

A proper plug gap will be listed on the emissions label that is sticked under the hood or near the radiator cadre support. Typical values: .040-.050

Honda spark plug thread size?

The typical Honda spark thread size is 14mm x i.25mm.

Source: https://www.youcanic.com/wiki/honda-spark-plug-ignition-coil-replacement-4-cylinder-engine

Posted by: hardydocketook.blogspot.com

Share this post